Our Build Process

Building a custom Reliance home requires precision in the field and behind the scenes with communication, collaborating and teamwork your home will be uniquely crafted to fit your lifestyle. 

Build

From ground breaking to completion you will watch as your vision comes to life!

The process of building a custom home is no small task, we strive to deliver an exceptional experience that continues throughout. The Reliance team will work together, following the best craftsmanship to bring to life your home that surrounds everything you need to love where you live. 

The Build Process

Understanding the process it takes to build your dream home can make building your new home an enjoyable experience every step of the way.

  • 1. Prepare Construction Site and Pour Foundation
    • Apply for and Acquire Permits
    • Construction Crew Levels Site
    • Puts Up Wooden Forms for the Temporary Foundation
    • Footings Are Installed

    Be sure permits are acquired prior to site preparation and foundation pouring. Following county government, zoning, and grading requirements. Each permit will then require an inspection.

  • 2. Complete Rough Framing
    • Floor System, Walls, Roof Systems Are Completed
    • Sheathing Applied to Exterior Walls, Covered With Protective Wrap
  • 3. Complete Rough Plumbing, Electrical, HVAC

    The Following Are Installed:

    • Pipes and Wires
    • Sewer Lines and Vents
    • Water Supply Lines
    • Bathtubs, Shower Units
    • Ductwork for HVAC System
    • HVAC Vent Pipes
  • 4. Install Insulation

    Common Types of Insulation in New Homes

    • Fiberglass
    • Cellulose
    • Foam Mineral Wool
    • Concrete Blocks
    • Insulation Concrete Forms
    • Spray Foam
    • Structural Insulated Panels
    • Foam Board or Ridged Foam
  • 5. Complete Drywall and Interior Fixtures, Start Exterior Finishes
    • Drywall is Hung and Taped
    • Texturing is Completed
    • Primary Coat of Paint is Applied
    • Exterior Finishes (Brick, Stucco, Stone) Are Installed
  • 6. Finish Interior Trim, Install Exterior Walkways and Driveway
    • Doors, Window Sills, Decorative Trim Installed
    • Cabinets, Vanities, Fireplace Mantles Installed
    • Final Coat of Paint
  • 7. Install Hard Surface Flooring, Countertops; Complete Exterior Grading

    Ceramic tile, vinyl, and wood flooring are installed as well as countertops. Exterior finish grading is completed to ensure proper drainage away from the home and prepare the yard for landscaping.

  • 8. Finish Mechanical Trims; Install Bathroom Fixtures

    Light fixtures, outlets, and switches are installed and the electrical panel is completed. HVAC equipment is installed and registers completed. Sinks, toilets, and faucets are put in place.

  • 9. Install Mirrors, Shower Doors; Finish Flooring, Exterior Landscaping

    Mirrors, shower doors, and carpeting are installed and final cleanup takes place. Trees, shrubs, and grass are planted and other exterior landscaping completed.

  • 10. Final Walk-Through
    • Your builder will walk you through your new home to acquaint you with its features and the operation of various systems and components and explain your responsibilities 
    • This is where you spot items that need to be corrected or adjusted!

    Your new home will be inspected periodically during the course of construction. In addition to mandated inspections for code compliance, your builder may conduct quality checks at critical points in the process.

Custom Home Design Process

Our homeowners enjoy watching their homes come to life.  From the initial consultation to the day the keys are handed over, each step brings them closer to their dream home is a reality.  Upon the finishing stages, homeowners can start to picture themselves in each space and how to decorate and get ready to entertain family and friends. 

DESIGN PROCESS